R&D Symposium 2
Battery Engineering for Automotive Applications
June 19-20, 2017 | Marriott Marquis Hotel | San Francisco, CA
Part of the 17th Annual Advanced Automotive Battery Conference
The Engineering Symposium at the Advanced Automotive Battery Conference will bring together high-level battery technologists to discuss advancements in the design, control, and integration of electric vehicle batteries. This symposium will encompass both cell and pack engineering and how advances in these areas allow implementation of safe and reliable high energy density and power density batteries. Improvements in automotive battery management systems, battery architectures, and safety will be discussed.
Day 1 | Day 2
Monday, June 19
12:30 pm Symposium Registration Open
1:30 Chairperson's Opening Remarks
Ted Miller, Senior Manager of Energy Storage Strategy and Research, Ford Motor Company
1:35 International Transport Agencies Preparing to Raise the Bar on Lithium Battery Safety
George Kerchner, Executive Director, PRBA - The Rechargeable Battery Association
The United Nations Transport Committee on Dangerous Goods and the International Civil Aviation Organization have begun exploring a new regulatory structure for classifying and shipping lithium batteries. A complete restructuring of the current regulatory requirements can be expected, which will have immediate and long-term implications for any company that plans to ship lithium batteries. An overview will be presented on the current regulatory requirements for shipping lithium batteries, what is currently being developed and considered at the international level, and what are the implications of the UN's and ICAO's activities for the industry.
1:55 A Method of Evaluating Battery Test Lab Safety
Erik Spek, Chief Engineer, TUV SUD Canada
TUV SUD has developed a measurement system that can determine an overall safety readiness score for a battery test lab that performs life and performance testing. This method captures all of the known hazards that may be encountered, during all of the phases of life and performance testing, including handling, transport and storage of samples, test preparation, battery disassembly and post-mortem analyses. Each hazard is then addressed by a risk containment measure that will deal with that hazard in a predetermined way. The method is flexible enough to add or remove additional risks, for any particular operation.
2:15 Presentation to be Announced
2:35 Power Electronics-Based Battery Energy Management Systems for Electric Transportation
Sheldon Williamson, Ph.D., Associate Professor, University of Ontario
This talk will illustrate how to enable aggressive usage while maintaining safety through the use of a power electronics-based battery energy management system.
2:55 Refreshment Break
3:15 Single Cell Thermal Runaway Calorimetry
Eric Darcy, Ph.D., Battery Technical Discipline Lead, Propulsion and Power Division, NASA-JSC/EP5
Previous attempts to obtain the total heat output response during thermal runaway (TR) by accelerated rate calorimetry have left us wondering if the results were relevant to field incidents. There's a suspicion that the total heat output is less than if thermal runaway had been induced quickly. We at JSC have designed a single 18650 TR calorimeter that provides total heat output and discerns those heat fractions. Various cell designs with and without bottom vents are compared.
3:35 Experiences and Evaluations of Thermal Propagation Testing
Scott Lananna, Technical Specialist, High Voltage Battery Safety, General Motors Company
A robust understanding of the impacts and interactions of test and battery design variables is critical for industry to converge on effective methods to evaluate the risks of thermal runaway propagation. With an emphasis on battery level outcome, this presentation will review test results characterizing some of these impacts and interactions. The implications of these results on test methods appropriate for engineering standards and regulations will be discussed.
3:55 Automotive Lithium-ion Battery (LIB) Supply Chain and U.S. Competitiveness Considerations
Shriram Santhanagopalan, Ph.D., Engineer, Transportation and Hydrogen Systems Center, National Renewable Energy Laboratory
We provide an objective analysis regarding the regional competitiveness contexts of manufacturing lithium-ion batteries (LIB) for the automotive industry by identifying key trends, cost considerations, and other market and policy developments that inform current competitiveness considerations for LIB production. We present findings from a detailed bottom-up cost modeling of regional production scenarios and an overview of qualitative factors that can influence factory location decisions. The NREL cost model includes a detailed, bottom-up accounting of the total costs that a manufacturer incurs in the high-volume production of LIB cells. Preliminary results indicate that Competitive locations and opportunities for automotive lithium-ion battery (LIB) manufacturing are mostly created, as opposed to being tied to factors that are inherent to specific regions. LIB pack production may remain proximal to original equipment manufacturer (OEM) end-product manufacturing, but materials and cell production could locate globally, in areas where competitive opportunities are strong.
4:15 Battery Management Control Unit
Lawrence Alger, Ph.D., Technical Manager, Electric & Hybrid Vehicle Engineering, Denzo
5:00 Close of Day
Day 1 | Day 2
Tuesday, June 20
8:30 am Symposium Registration Open and Morning Coffee
9:00 Chairperson's Remarks
Oliver Gross, Technical Fellow, Energy Storage System, FCA US LLC
9:05 Field Study Results from 500e (Life Validation Testing and Real-World Correlation, for EV Batteries)
Oliver Gross, Technical Fellow, Energy Storage System, FCA US LLC
While battery modeling and simulation have both progressed considerably in recent years, verification of life model predictability remains an area which is viewed with lower confidence, given the maturity of actual vehicle field data. The Fiat 500e field data will be presented, against the original life model predictions for the battery. Data analysis, performed jointly with Bosch Battery Systems, will be compared with component tests, and predictive models, in order to identify the most relevant environmental and operations stress factors for the battery.
9:25 Glimpses into xEV Batteries on the Market - AVL Series Battery Benchmarking
Wenzel Prochazka, Ph.D., Product Manager, Global Battery Management Team, AVL List GmbH
The AVL battery benchmarking activity provides a database for objective comparison in technical attributes as well as in engineering methodology with market competitors for clear system target definition of high performing, reliable, and safe batteries. More than 240 different criteria are evaluated through AVL benchmarking metrics displayed in 8 high-level attributes. In this presentation some of the battery system performance criteria are compared using different vehicles as examples, such as the Mitsubishi Outlander, Tesla Model S, Renault Zoe and Chevrolet Bolt.
9:45 Computational Design of Batteries from Materials to Systems
Kandler Smith, Senior Engineer, Transportation and Hydrogen Systems Center, NREL
Computer models are helping to accelerate the design and validation of next generation batteries and provide valuable insights not possible through experimental testing alone. Validated 3-D physics based models exist for predicting electrochemical performance, thermal and mechanical response of cells and packs under normal and abuse scenarios. The talk describes present efforts to make the models better suited for engineering design, including improving their computation speed, developing faster processes for model parameter identification including under aging, and predicting the performance of a proposed electrode material recipe a priori using microstructure models.
10:05 Grand Opening Coffee Break in the Exhibit Hall with Poster Viewing
11:00 Sponsored Presentation (Opportunity Available)
11:20 Strain-Enabled Multi-Physical Models of Li-Ion Battery Cells for Control and State Estimation
Bogdan Epureanu, Ph.D., Professor, Mechanical Engineering, University of Michigan
This presentation focuses on recent results of creating multiphysical models that enable the use of strain to enhance control and state estimation of battery cells. This model can capture electrical, thermal, and mechanical behaviors of battery cells.
11:40 Life Balancing - A Better Way of Battery Management for Large Battery Packs
Scott Trimboli, Ph.D., Assistant Professor, College of Engineering & Applied Sciences, University of Colorado, Colorado Springs
A novel method of battery management was developed for large battery packs such as those used in Plug In Hybrid and Battery Electric Vehicles where the existing battery management system and DC/DC converter are replaced by an integrated, modular battery management-DC/DC converter system. The system contains of a number of small DC-DC converters in parallel with one or more cells. Differing loads through the DC-DC converters are used to differentially balance the various cells. This method has increased battery life by reducing stress on the weaker cells in the battery.
12:00 pm Materials Processing and Stability Challenges of Anodes and Cathodes for High-Energy-Density Lithium-Ion Batteries
David Wood, III, Ph.D., Team Lead, Roll-to-Roll Manufacturing Manager, Fuel Cell Technologies Program, Joint Faculty Associate Professor, University of Tennessee
Lithium-ion battery pack costs have dropped significantly over the past several years from about $500-600/kWh down to $275-325/kWh due to economies of scale, improvements in electrode and cell quality control, and more efficient production methods. However, much more development on electrode processing cost reduction, coating deposition quality control, and cell assembly methods needs to occur in order to meet the DOE ultimate pack cost of $125/kWh for battery electric vehicles (BEVs).
12:40 Networking Lunch
1:35 Dessert Break in the Exhibit Hall with Poster Viewing
2:35 Chairperson's Remarks
Robert Spotniz, President, Battery Design LLC
2:40 New and Pragmatic Methods to Model the Thermodynamics of Lithium Ion Battery Electrodes
Mark Verbrugge, Ph.D., Director, Chemical and Materials Systems Laboratory, General Motors
We derive and implement a method to describe the thermodynamics of electrode materials based on a substitutional lattice model. To assess the utility and generality of the method, we compare model results with experimental data for a variety of electrode materials: lithiated graphite, silicon, NMC (nickel manganese cobalt oxide), manganese oxide, and iron phosphate. The model enables one to quantitatively represent experimental data from these different electrode materials with a small number of parameters, and, in this sense, the approach is both general and efficient. An open question is the utility of controlled-potential vs. controlled-current experiments for the elucidation of the system thermodynamics.
3:00 High Throughput Atomic Layer Deposition: Interfacial Engineering at Scale
James Trevey, Ph.D., Vice President, ForgeNano
The bulk materials designed for today's leading batteries suffer from degradation that results in poor performance and short lifetime. By applying Forge Nano's patented high-throughput atomic layer deposition process, current bulk materials can be upgraded to perform beyond industry established performance metrics. The benefits of ALD have been widely demonstrated over the past few decades; however, the technology has been considered dead among the industry due to its lack of scale and prohibitive costs.
3:20 Virtual Electrode Engineering: From Mesoscale Underpinnings to System Characteristics
Partha P. Mukherjee, Ph.D., Assistant Professor, Mechanical Engineering, Morris E. Foster Faculty Fellow II, Texas A&M University
In recent years, lithium-ion batteries (LIB) have emerged as a leading candidate for vehicle electrification. Porous electrodes, with underlying coupled physicochemical processes, play a critical role in the performance, life, and safety of LIBs. This talk will seek to demonstrate the role of virtual electrode engineering, relying on mesoscale physics-based modeling and analysis, in discerning the lithium-ion battery system characteristics.
4:00 Networking Reception in the Exhibit Hall with Poster Viewing
5:05 Close of Symposium